HomeAbout UsProductsE-CatalguesContact Us
Home / Products / Sawing Machines / Automatic Miter Cut Off Saws For Aluminum / Groove Cutting Machine AF-455 L

Automatic Miter Cut Off Saws For Aluminum


Groove Cutting Machine AF-455 L

- Automation feed, positioning. oil splashing and sawing.
- Feed stroke 1400mm / 3000mm / 6000mm.(Reciprocating feed stroke up to any limit for length)
- Horizontal cutting and saw move on linear guide way, that assure accurate and large cutting.
- Ball screw is driven by servo motor for high accuracy. (Transmission through precision ground rack is available)
- Equipped with Mitsubish: NC control. PLC features extremely stable control performance. Employs CE certified control components.
- Equipped eith touch sensing screen for maximum operation convenience.
- Feed is driven by hydraulic system, providing maximum stability of cutting.
- Two sets each of hold-down clamps and horizontal clamps provided on the feeding system permits cutting of irregular work piece.
- 100 sets of size memory capacity. Each set allows for setting 12 sizes.
- The computer automatically records required time and quantity for each machining, providing convenient calculation of machining cost.
- During operation, the machine provides detection for lock of material. Available to set tail length to be cut. Workpieces can be stacked.
- Workpieces can be stacked.
- Feed methods : 1. Stepping feed. 2. Reciprocating feed. 3. Manual feed.
- Variable spindle speed ( RPM ) Accommodates sawblade form 10" to 24".
Model AF-455 L
Servo Drive System Ball screw / (or Hight precision ground rack)
Cutting Capacity (mm) 200 x 200 , 175 x 210, 130 x 350, 20 x 400(depends on sawblade dia)
Cutting Capacity Chart or ( 200 x 400mm optional )
Max. Feed Distance(one cycle) 1350mm ( 3000 / 6000 mm opt. ) Unlimited recycle feed distance
Automatic Feed Accuracy (mm) ±0.1
Saw Spindle Speed (R.P.M.) 1500 - 3500 variable (Depends on sawblade size to set)
Saw Spindle Motor (HP) 15 ( 20 opt. )
Hydraulic Feed Motor (HP) 1
Servo Motor (Kw) 1
Touch-Sensing Screen (inch) 5.7"
Sawblade Size (inch) choice of 12", 14", 16", 18", 20", 22", 24"(1" bore)
Air Pressure (kgs/cm2) 4 ~ 6
Machine Dim. (mm) 3500 x 2100 x 1860
Packing Dim. (mm) 3620 x 2220 x 2000
Net / Gross Weight (kgs) 2300 / 2700
Cutting Capacity Chart
MAX. cutting and clamping width 400mm
MAX. cutting and clamping height 175mm (opt. MAX cutting and clamping 200mm)
Sawblade Feed Motion Diagram Optional Motion
Specially design cutting motion after the saw blade moves forward for cutting work piece. Both tables driven by their air cylinder. Moves backward and the sawblade returns to its home position. This design allows for a smoother and more accurate cut on the work piece by preventing work piece form scratches from when the sawblade returns. Cutting accuracy is of up to ±0.05mm.

A. Clamping material.
B. Cutting material by straight line.
C. After cutting.
D-1. The right moves backward by 2mm.
D-2. Left worktable.(connect feed stroke)
E. The sawblade returns to original place.
F. The worktable returns to original place.
*All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.
The clamps on the feed tale are suited for cutting irregular stock without need of additional fixtures to fix the workpiece.
- 3 or 6 meters automatic feed device.
- Choice of precision ground rack or ball screw.
- Dust collector and suction hose.
- Infeed roller conveyor.
- Sawblade.
- Automatic air blast device.